Journal of Materials Science and Engineering with Advanced Technology[1] M. V. Bruschke and S. G. Advani, A finite-element control volume
approach to mold filling in anisotropic porous-media, Polym. Compos.
11(6) (1990), 398-405.
[2] J. A. Luoma and V. R. Voller, An explicit scheme for tracking the
filling front during polymer mold filling, Appl. Math. Model. 24(8-9)
(2000), 575-590.
[3] S. G. Advani and E. M. Sozer, Process Modeling in Composites
Manufacturing, 2nd Edition, CRC Press, Taylor & Francis Group,
2010.
[4] F. R. Phelan, Simulation of the injection process in resin
transfer molding, Polym. Compos. 18(4) (1997), 460-476.
[5] C. W. Hirt and B. D. Nichols, Volume of fluid (VOF) method for the
dynamics of free boundaries, J. Comput. Phys. 39(1) (1981),
201-225.
[6] J. Yang, Y. X. Jia, S. Sun, D. J. Ma, T. F. Shi and L. J. An,
Enhancements of the simulation method on the edge effect in resin
transfer molding processes, Mater. Sci. Eng. A 478(1-2) (2008),
384-389.
[7] J. A. GarcÃa, L. Gascón and F. Chinesta, A fixed mesh
numerical method for modelling the flow in liquid composites moulding
processes using a volume of fluid technique, Comput. Methods Appl.
Mech. Eng. 192(7-8) (2003), 877-893.
[8] M. Moeini Sedeh and J. M. Khodadadi, Interface behavior and void
formation during infiltration of liquids into porous structures, Int.
J. Multiph. Flow 57 (2013), 49-65.
[9] J. Bréard, A. Saouab and G. Bouquet, Numerical simulation of
void formation in LCM, Compos. Part Appl. Sci. Manuf. 34(6) (2003),
517-523.
[10] E. Ruiz, V. Achim, S. Soukane, F. Trochu and J. Breard,
Optimization of injection flow rate to minimize micro/macro-voids
formation in resin transfer molded composites, Compos. Sci. Technol.
66(3-4) (2006), 475-486.
[11] J. A. Souza, L. A. Isoldi, E. D. dos Santos, C. P. Oliveira and
S. C. Amico, A Numerical Methodology for Permeability Determination of
Reinforcements for Polymeric Composites, in ENCIT 2012 - Book of
Abstracts, Rio de Janeiro, RJ - Brazil (2012), 1-7.
[12] S. K. Kim and I. M. Daniel, Determination of three-dimensional
permeability of fiber preforms by the inverse parameter estimation
technique, Compos. Part Appl. Sci. Manuf. 34(5) (2003), 421-429.
[13] O. Restrepo, K.-T. Hsiao, A. Rodriguez and B. Minaie, Development
of adaptive injection flow rate and pressure control algorithms for
resin transfer molding, Compos. Part Appl. Sci. Manuf. 38(6) (2007),
1547-1568.
[14] S. Laurenzi, A. Casini and D. Pocci, Design and fabrication of a
helicopter unitized structure using resin transfer moulding, Compos.
Part Appl. Sci. Manuf. 67 (2014), 221-232.
[15] L. A. Isoldi, C. P. Oliveira, Luiz A. O. Rocha, Jeferson A. Souza
and S. C. Amico, Three-dimensional numerical modeling of RTM and LRTM
processes, J. Braz. Soc. Mech. Sci. Eng. 34(2) (2012), 105-111.
[16] S. H. Han, E. J. Cho, H. C. Lee, K. Jeong and S. S. Kim, Study on
high-speed RTM to reduce the impregnation time of carbon/epoxy
composites, Compos. Struct. 119 (2015), 50-58.
[17] C. Geuzaine and J.-F. Remacle, Gmsh: A 3-D finite element mesh
generator with built-in pre- and post-processing facilities, Int. J.
Numer. Methods Eng. 79(11) (2009), 1309-1331.
[18] H. G. Weller, G. Tabor, H. Jasak and C. Fureby, A tensorial
approach to computational continuum mechanics using object-oriented
techniques, Comput. Phys. 12(6) (1998), 620.
[19] V. Srinivasan, A. J. Salazar and K. Saito, Modeling the
disintegration of modulated liquid jets using volume-of-fluid (VOF)
methodology, Appl. Math. Model. 35(8) (2011), 3710-3730.
[20] P. Higuera, J. L. Lara and I. J. Losada, Realistic wave
generation and active wave absorption for Navier-Stokes models, Coast.
Eng. 71 (2013), 102-118.
