Journal of Materials Science and Engineering with Advanced Technology[1] W. C. Neil, M. Forsyth, P. C. Howlettt, C. R. Hutchison and B. R.
W. Hinton, Corrosion of magnesium alloy ZE41 : The role of
micro-structural features, Corrosion Science 51 (2009), 387-394.
[2] Lei Wang, Bo-Ping Zhang and Tadashi Shinohara, Corrosion behaviour
of AZ91 magnesium alloy in dilute NaCl solutions, Materials and Design
31 (2010), 857-863.
[3] B. L. Mordike and T. Ebert, Magnesium: Properties, applications,
potential, Mater. Sci. Eng. A 302 (2001), 37.
[4] N. Krishnamurthy, M. S. Murali, B. Venkataraman and P. G. Mukunda,
Characterization and solid particle erosion behaviour of plasma
sprayed alumina and calcia-stabilized zirconia coatings on Al-6061
substrate, Wear 274-275 (2012), 15-27.
[5] L. Wang, J. C. Fang, Z. Y. Zhao and H. P. Zeng, Application of
backward propagation network for forecasting hardness and porosity of
coatings by plasma spraying, Surf. Coat. Technol. 201 (2007),
5085-5089.
[6] X. C. Zhang, B. S. Xu, F. Z. Xuan, H. D. Wang , Y. X. Wu and S. T.
Tu, Statistical analyses of porosity variations in plasma-sprayed
Ni-based coatings, J. Alloys Compd. 467 (2009), 501-508.
[7] X. C. Zhang, B. S. Xu, F. Z. Xuan, H. D. Wang and Y. X. Wu,
Microstructural and porosity variations in the plasma-sprayed Ni-alloy
coatings prepared at different spraying powers, Journal of Alloys and
Compounds 473 (2009), 145-151.
[8] E. Celik, I. Ozdemir, E. Avci and Y. Tsunekawa, Corrosion
behaviour of plasma sprayed coatings, Surface & Coatings Technology
193 (2005), 297-302.
[9] K. Spencer, D. M. Fabijanic and M. X. Zhang, The use of 
cold spray coatings to improve the surface
properties of magnesium alloys, Surf. Coat. Technol. 204 (2009),
336-344.
[10] F. L. Toma, C. C. Stahr, L. M. Berger, S. Saaro, M. Herrmann, D.
Deska and G. Michael, Corrosion resistance of APS and HVOF sprayed
coatings in the 
system, J. Thermal Spray Technol. 19
(2009), 137-147.
[11] Dianran Yan, Jining He, Xiangzhi Li, Yangaia Liu, Jianxin Zhang
and Huili Ding, An investigation of the corrosion behaviour of
based ceramic composite coatings in dilute
HCl solution, Surface and Coatings Technology 141 (2001), 1-6.
[12] M. Carboneras, M. D. Lopez, P. Rodrigo, M. Campo, B. Torres, E.
Otero and J. Rams, Corrosion behavior of thermally sprayed Al and
Al/SiCp composite coatings on ZE41 magnesium alloy in chloride medium,
J. Corros. Sci. 52 (2010), 761-768.
[13] Mokhtar Bounazef, Sofiane Guessasma, Ghislain Montavon and
Christian Coddet, Effect of APS process parameters on wear behaviour
of alumina-titania coatings, Materials Letters 58 (2004),
2451-2455.
[14] ASTM B276-05, Standard Test Method for Apparent Porosity in
Cemented Carbides, Pennsylvania: American Society for Testing and
Materials 2010, Volume 02-05.
[15] ASTM G31-72, Standard Practice for Laboratory Immersion Corrosion
Testing of Metals, American Society for Testing of Materials, 2002.
[16] ASTM G1-03, Standard Practice for Preparing, Cleaning and
Evaluating Corrosion Test Specimens, American Society for Testing of
Materials, 2003.
[17] You Wang, Wei Tian, Tao Zhang and Yong Yang, Microstructure,
spallation and corrosion of plasma sprayed 
coatings, Corrosion Science 51 (2009),
2924-2931.
[18] Heng Wu, He-jun Li, Qing Lei, Qian-gang Fu, Chao Ma, Dong-jia
Yao, Yong-jie Wang, Can Sun, Jian-feng Wei and Zhi-hai Han,
‘Effect of spraying power on microstructure and bonding strength
of 
-based coatings prepared by supersonic
plasma spraying, Journal of Applied Surface Science 257 (2011),
5566-5570.
[19] R. Arrabal, A. Pardo, M. C. Merino, M. Mohedano, P. Casajus and
S. Merino, Al/SiC thermal spray coatings for corrosion protection of
Mg-Al alloys in humid and saline environments, Surface & Coatings
Technology 204 (2010), 2767-2774.
[20] A. Pardo, P. Casajus, M. Mohedano, A. E. Coy, F. Viejo, B. Torres
and E. Matykina, Corrosion protection of Mg/Al alloys by thermal
sprayed aluminium coatings, Applied Surface Science 255 (2009),
6968-6977.
[21] C. S. Ramachandran, V. Balasubramanian and P. V.
Ananthapadmanabhan, Multiobjective optimization of atmospheric plasma
spray process parameters to deposit yttria-stabilized zirconia
coatings using response surface methodology, J. Therm. Spray. Technol.
20 (2010), 590-607.
[22] A. Kucuk, C. C. Berndt, U. Senturk, R. S. Lima and C. R. C. Lima,
Influence of plasma spray parameters on mechanical properties of
yttria-stabilized zirconia coatings, I: Four point bend test, Mater.
Sci. Eng. A 284 (2000), 29-40.
[23] Yongshan Tao, Tianying Xiong, Chao Sun, Lingyan Kong, Xinyu Cui,
Tiefan Li and Guang-Ling Song, Microstructure and corrosion
performance of a cold sprayed aluminium coating on AZ91D magnesium
alloy, Corrosion Science 52 (2010), 3191-3197.
[24] C. S. Ramachandran, V. Balasubramanian and P. V.
Ananthapadmanabhan, On resultant properties of atmospheric plasma
sprayed yttria-stabilised zirconia coating deposits: designed
experimental and characterisation analysis, Surf. Eng. 27 (2011),
217-229.
[25] Jifu Zhang, Wei Zhang, Chuanwei Yan, Keqin Du and Fuhui Wang,
Corrosion behaviours of Zn/Al-Mn alloy composite coatings deposited on
magnesium alloy AZ31B (Mg-Al-Zn), Journal of Electrochimica Acta 55
(2009), 560-571.
[26] Wei-min Zhao, Cun Liu, Li-xian Dong and Yong Wang, Effects of arc
spray process parameters on corrosion resistance of Ti coatings,
Journal of Thermal Spray Technology 518 (2009), 702-707.
[27] L. Gil and M. H. Staia, Influence of HVOF parameters on the
corrosion resistance of NiWCrBSi coatings, Journal of Thin Solid Films
420 (2002), 446-454.
[28] V. Balasubramanian, A. K. Lakshminarayanan, R. Varahamoorthy and
S. Babu, Understanding the parameters controlling plasma transferred
arc hard facing using response surface methodology, Materials and
Manufacturing Processes 23 (2008), 674-682.
