Journal of Materials Science and Engineering with Advanced Technology[1] M. Claude, N. Yemele, A. Koubaa, P. N. Diouf, P. Blanchet, A.
Cloutier and T. Stevanovic, Effects of hot-water treatment of black
spruce and trembling aspen bark raw material on the physical and
mechanical properties of bark particleboard, Wood and Fiber
Science 40 (2008), 339-351.
[2] J. L. Bowyer, R. Shmulsky and J. G. Haygreen, Forest products and
wood science: An introduction, Wiley-Blackwell, A. Chakraborty, M.
Sain and M. Kortschot, 2006, Cellulose microfibers as reinforcing
agents for structural materials, Cellulose Nanocomposites: Processing,
Characterization, and Properties (2007), 169-186.
[3] E. Ives, A Guide to Wood Microtermy; Making Quality Microslides of
Wood Sections, Ipswich, Suffolk IP8 3 AY, UK. N. C. Jain, R. C.
Gupta and D. K. Jain, 1967. Particleboard from groundnut shells,
Proceedings of 11th Silviculture Conference, May 1967, India, 2001.
[4] M. J. Boonstra, A. Pizzi, M. Ohlmeyer and W. Paul, The effects of
a two stage heat treatment process on the properties of particleboard,
European Journal of Wood and Wood Products 64 (2006), 157-164.
[5] N. Boquillon, G. Elbez and U. Schonfeld, Properties of wheat straw
particleboards bonded with different types of resin, Journal of Wood
Science 50(28) (2004), 230-235.
[6] L. T. Chew, M. N. Nurulhuda, C. L. Ong and S. Rahim, Particleboard
from some plantation species, pp. 708-724 in S. A. Abod et. al.
(Eds.), Proceedings of a Regional Symposium on Recent Developments in
Tree Plantations of Humid/Subhumid Tropics of Asia, 5-9 June 1989,
Serdang, Universiti Putra Malaysia, Serdang, Malaysia, 1991.
[7] S. Frybort, R. Mauritz, A. Teischinger and U. Muller, Cement
bonded composites: A mechanical review, Bioresources 3 (2008),
602-626.
[8] E. Guntekin and B. Karakus, Feasibility of using egg-plant
(solanum melongena) stalks in the production of experimental
particleboard, Industrial Crops and Products 27 (2008), 354-358.
[9] G. Han, C. Zhang, D. Zhang, D. Umerra and S. Kawai, Upgrading of
urea formaldehyde bonded reed and wheat straw particleboard using
silane coupling agents, J. Wood Sci. 44 (1998), 282-286.
[10] A. Hermawan, T. Ohuchi, N. Fujimoto and Y. Murase, Manufacture of
composite board using wood prunings and waste porcelain stone, Journal
of Wood Science 55(30) (2009), 74-79.
[11] A. D. Hofstrand, A. A. Moslemi and J. F. Garcia, Curing
characteristics of wood particles from nine northern rocky mountains
species mixed with portland cement, Forest Prod. J. 34(7) (1984),
57-61.
[12] U. D. Idris, V. S. Aigbodion, R. M. Gadzama and J. Abdullahi,
Eco-friendly (watermelon peels) alternatives to wood-based
particleboard composites, Pacific Journal of Science and Technology
12(2) (2011), 112-119.
[13] U. D. Idris, V. S. Aigbodion, R. M. Gadzama and T. Y. Ahmed,
Suitability of maize cob particles and recycled low density
polyethylene for particleboard manufacturing, Materials Science, MSAIJ
8(1) (2012), 34-37.
[14] H. KalaycioÄŸlu and G. Nemli, Properties of structural
particleboard prepared from the bark of pinus brutia, Proceedings of
the XI World Forestry Congress, 13-22 October 1997, Antalya, Turkey,
(1997), 50.
[15] P. Khristova, N. Yussifou, S. Gabir, I. Glavche and Z. Osman,
Particleboards from sunflower stalks and tannin modified UF resin,
Cell. Chem. Technol. 32 (1998), 327-337.
[16] R. Kozlowski and M. Helwig, Lignocellulosic Polymer Composite,
In: P. N. Prasad, (Ed.), Science and Technology of Polymers and
Advanced Materials, Plenum Press, New York, 1998, pp. 679-698.
[17] M. Kuo, D. Adams, D. Myers, D. Curry, K. Heemstra, J. Smith and
Y. Bian, Properties of wood agricultural fiberboard bonden with
soyabean-based adhesives, Forest Prod. J. 48(2) (1998), 71-75.
