[1] L. V. Amorim, Melhoria, proteção e recuperação da reologia de
fluidos hidroargilosos para uso na perfuração de poços de
petróleo, Thesis (Doctorate in Engenharia de Processos), Centro de
Ciências e Tecnologia, UFCG, Campina Grande, PB, 2003.
[2] Anonymous, Stuck pipe, Chapter 15, Revision No. A-0 / Revision
Date. 03.31.98, pg. 15.1 a 15.24, [Access in: 08 August 2010].
<http://www.scribd.com/doc/17232
761/Stuck-Pipe>
[3] API, Rule API Recommended Practice 13B-1, November 2003.
[4] Y. M. Bushnell-Watson and S. S. Panesar, Mechanisms of
differential sticking and a simple well site test for monitoring and
optimizing drilling mud properties, SPE 22549, 1991.
[5] J. V. L. Cardoso Júnior, Diagnóstico de Problemas em Poços
Direcionais Durante as Manobras, Dissertation (Masters in Petroleum
Engineering), Centro de Ciências e Tecnologia, Universidade Estadual
de Campinas - UNICAMP, Campinas, SP, 1992.
[6] J. P. Cerqueira, A Metodologia de Análise e Solução de
Problemas, Equipe Grifo, 2nd Edition, Editor Afiliada, São Paulo,
SP, 1997.
[7] R. K. Clark, Impact of environmental regulations on drilling fluid
technology, Journal of Petroleum Technology 46(9) (1994), 804-809.
[8] H. C. H. Darley and G. R. Gray, Composition and Properties of
Drilling and Completion Fluids, 5th Edition, Gulf Publishing Company,
Houston, Texas, 1988.
[9] K. V. Farias, Influência do Umectante Aniônico na Reologia e
Espessura de Reboco de Fluidos Hidroargilosos, Dissertation (Masters
in Chemical Engineering), Centro de Ciências e Tecnologia,
Universidade Federal de Campina Grande (UFCG), Campina Grande, PB,
2005.
[10] A. I. Ferraz, Manual de Engenharia dos Fluidos de Perfuração,
Division Magcobar Group Oil Field Products Dresser Industries,
1977.
[11] P. Isambourg, S. Ottesen, S. Benaissa and J. Marti, Down-hole
simulation cell for measurement of lubricity and differential pressure
sticking, SPE/IADC 52816, March, 1999.
[12] V. C. Kelessidis, A. Mihalakis and C. Tsamantaki, Rheology and
rheological parameter determination of bentonite-water and
bentonite-lignite-water mixtures at low and high temperatures, 7th
World Congress of Chemical Engineering, Glasgow, July 10-14, 2005.
[13] V. C. Kelessidis, C. Tsamantaki, N. Pasadakis, E. Repouskou and
E. Hamilaki, Permeability, porosity and surface characteristics of
filter cakes from water-bentonite suspensions, WIT Transactions on
Engineering Sciences 56 (2007).
[14] M. V. Kok and T. Alikaya, Rheological evaluation of polymers as
drilling fluids, Petroleum Science and Technology 21 (2003),
113-123.
[15] D. A. Krol, Additives cut differential pressure sticking in drill
pipe, Oil & Gas Journal Technology (1984), 55-59.
[16] J. Magalhães, J. Contatos Pessoais, 2010.
[17] C. Malfoy, A. Pantel, P. Monnet and D. Righi, Effects of the
nature of the exchangeable cation and clay concentration on the
rheological properties of smectite suspensions, Clays and Clay
Minerals 51(6) (2003), 656-663, DOI: 10.1346/CCMN.2003.0510608,
[18] K. Miura, I. R. Guilherme, C. K. Morooka and J. R. P. Mendes,
Processing technical daily reports in offshore petroleum engineering:
An experience, Journal Advance Computational Intelligence and
Intelligent Informatics 7(2) (2003).
[19] R. B. Z. L. Moreno, E. J. Bonet and A. T. A. Waldmann, Invasão
de Fluidos de Perfuração em Reservatórios de Oleo, 3rd Encontro
Nacional de Hidráulica de Poços, Campos do Jordão - SP, 2009.
[20] R. C. A. M. Nascimento and L. V. Amorim, Desenvolvimento de
fluidos aquosos com bentonita para perfuração de poços de petróleo
onshore, Cerâmica 56 (2010), 179-187.
[21] E. Pereira, Uso de Inibidores de Argilas Como Solução de
Problemas em Sondagens, [acesso em: 20 April 2003].
<http://www.systemmud.com.br/index.php?PG=literatura
&sub=literature_home&artigo=lit_006>
[22] Petrobras, Argila Aditivada Para Fluido de Perfuração à Base
de Água na Exploração e Produção de Petróleo, Método, N-2605,
1998.
[23] P. I. Reid, G. H. Meeten, P. W. Way, P. Clark, B. D. Chambers, A.
Gilmour and M. W. Sanders, Differential-sticking mechanisms and a
simple wellsite test for monitoring and optimizing drilling mud
properties, SPE 64114, SPE Drilling & Completion (2000).
[24] K. Simon, N. Gaurina-Medimurec and B. Pasic, Drilling fluids
differential sticking tendency, Rudarsko-geološko-naftnizbornik, UDC
622.244.442, Zagreb. 17 (2005), 31-35.
[25] J. E. Thomas, Fundamentos de Engenharia de Petróleo, Editora
Interciência, Rio de Janeiro, 2001.