Journal of Materials Science and Engineering with Advanced Technology[1] J. O. Aweda, Experimental determination of heat transfer
coefficients during squeeze casting of aluminum, J. Mater. Process
Technol. 209 (2009), 1477-1483.
[2] J. V. Beck, Nonlinear estimation applied to nonlinear inverse heat
conduction problem, Int. J. Heat Mass Transf. 13 (1970), 703-716.
[3] Z. W. Chen, Skin solidification during high pressure die casting
of Al-11Si-2Cu-1Fe alloy, Mater. Sci. Engg. A 348 (2003), 145-153.
[4] W. D. Griffiths, The heat transfer coefficient during the
unidirectional solidification of an Al-Si alloy casting, Metall.
Mater. Trans. B 30 (1999), 473-482.
[5] W. D. Griffiths, A model of the interfacial heat-transfer
coefficient during unidirectional solidification of an aluminum alloy,
Metall. Mater. Trans. B 31 (2000), 285-295.
[6] A. Hines, Determination of interfacial heat-transfer boundary
conditions in an aluminum low-pressure permanent mold test casting,
Metall. Mater. Trans. B 35 (2004), 299-310.
[7] K. P. Ho, Metal-mold interfacial heat transfer, Metall. Mater.
Trans. B 16 (1985), 585-594.
[8] F. P. Incropera, Fundamentals of Heat and Mass Transfer (3rd
edition ed.), John Wiley & Sons, Singapore, 1990.
[9] M. S. Krishnan, Determination of heat transfer coefficient between
casting and chill in uni-directional heat flow, AFS Trans. 102 (1994),
769-778.
[10] J. H. Kuo, Effects of mold coating and mold material on the heat
transfer coefficient at the casting/mold interface for permanent mold
casting of A356 aluminum alloy, AFS Trans. 01-061 (2001), 1-17.
[11] T. A. Loulou, Estimation of thermal contact resistance during the
first stages of metal solidification process: I-Experiment principle
and modelisation, Int. J. Heat Mass Transf. 42 (1999), 2119-2127.
[12] M. A. Martorano, Heat transfer coefficient at the metal-mould
interface in the unidirectional solidification of Cu-8%Sn alloys, Int.
J. Heat Mass Transf. 43 (2000), 2541-2552.
[13] Y. M. Nishida, Effect of pressure on heat transfer at the metal
mold-casting interface, J. British Foundaryman 69 (1976), 274-278.
[14] T. S. Piwonka, Modelling casting dimensions: Effect of wax
rheology and interfacial heat transfer, Mater. Des. 21 (2000),
365-372.
[15] H. M. Sahin, Determination of unidirectional heat transfer
coefficient during unsteady-state solidification at metal
casting-chill interface, Energy Convers. Manage. 47 (2006), 19-34.
[16] C. A. Santos, Determination of transient interfacial heat
transfer coefficients in chill mold castings, J. Alloys Compd. 319
(2001), 174-186.
[17] C. A. Santos, Metal-mold heat transfer coefficients during
horizontal and vertical unsteady-state solidification of Al-Cu and
Sn-Pb alloys, Inverse Probl. Engg. 12 (2004), 279-296.
[18] J. E. Spinelli, Influence of melt convection on the columnar to
equiaxed transition and microstructure of downward unsteady-state
directionally solidified Sn-Pb alloys, J. Alloys Compd. 384 (2004a),
217-226.
[19] J. E. Spinelli, Influence of melt convection on dendrite spacing
of downward unsteady-state directionally solidified Al-Cu alloys,
Mater. Sci. Engg. A 383 (2004b), 271-282.
