[1] M. H. Attia and R. B. Waterhouse, Eds., Standardization of
Fretting Fatigue Test Methods and Equipment, ASTM STP 1159, American
Society for Testing and Materials, Philadelphia, 1992.
[2] M. H. Attia, Fretting Fatigue of Some Nickel-based Alloys in Steam
Environment at 265ºC, Fretting Fatigue: Current Technology and
Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran and C. B.
Elliott, Eds., American Society for Testing and Materials, West
Conshohocken, PA, (2000), 231-246.
[3] T. Hansson, M. Kamaraj, Y. Mutoh and B. Peterson, High Temperature
Fretting Fatigue Behaviour in an XDTM base TiAl, Fretting Fatigue: Current
Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V.
Chandrasekaran and C. B. Elliott, Eds., American Society for Testing
and Materials, West Conshohocken, PA, (2000), 65-79.
[4] D. A. Hills and D. Nowell, Mechanics of Fretting Fatigue, Kluwer
Academic Publishers, Dordrecht, 1994.
[5] D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott, Eds.,
Fretting Fatigue: Current Technologies and Practice, ASTM STP 1367,
American Society for Testing and Materials, West Conshohocken,
2000.
[6] K. Iyer and S. Mall, Effects of cyclic frequency and contact
pressure on fretting fatigue under variable-amplitude loading, Fatigue
& Fracture of Engineering Materials and Structures 23 (2000), 335-346.
[7] S. E. Kinyon, D. W. Hoeppner and Y. Mutoh, Eds., Fretting Fatigue:
Advances in the Basic Understanding and Applications, ASTM STP 1425,
American Society for Testing and Materials, West Conshohocken,
2003.
[8] J. D. Kwon, Y. S. Chai, Y. T. Bae and S. J. Choi, A study on
fretting behaviour in room temperature for Inconel alloy 690,
International Journal of Modern Physics B 20 (2006), 4303-4308.
[9] H. Lee, O. Jin and S. Mall, Fretting fatigue behaviour of
Ti-6Al-4V with dissimilar mating materials, International Journal of
Fatigue 26 (2004), 393-402.
[10] H. Lee and S. Mall, Effect of dissimilar mating materials and
contact force on fretting fatigue behaviour of Ti-6Al-4V, Tribology
International 37 (2004), 35-44.
[11] C. D. Lykins, S. Mall and V. K. Jain, Combined
experimental-numerical investigation of fretting fatigue crack
initiation, International Journal of Fatigue 23 (2001), 703-711.
[12] C. D. Lykins, S. Mall and V. K. Jain, A shear stress-based
parameter for fretting fatigue crack initiation, Fatigue & Fracture of
Engineering Materials and Structures 24 (2001), 461-473.
[13] S. Mall, J. L. Ng and E. Madhi, Fretting fatigue behaviour of
shot-peened Ti-6Al-4V and IN100, Journal of ASTM International 5
(2008).
[14] K. Miyoshi, B. A. Lerch, S. L. Draper and S. V. Raj, Evaluation
of Ti-48Al-2Cr-2Nb under Fretting Fatigue Conditions, Fretting
Fatigue: Advances in Basic Understanding and Applications, ASTM STP
1425, Y. Mutoh, S. E. Kinyon and D. W. Hoeppner, Eds., American
Society for Testing and Materials, West Conshohocken, PA, (2003),
323-337.
[15] H. Murthy, D. B. Garcia, J. F. Matlik and T. Farris, Fretting
fatigue of single crystal/polycrystalline nickel subjected to
blade/disk contact loading, Acta Astronautica 57 (2005), 1-9.
[16] H. Murthy, G. Gao and T. Farris, Fretting fatigue of single
crystal nickel at 600°C, Tribology International 39 (2006),
1227-1240.
[17] S. A. Namjoshi, S. Mall and V. K. Jain, Fretting fatigue crack
initiation mechanism in Ti-6Al-4V, Fatigue & Fracture of Engineering
Materials and Structures 25 (2002), 955-964.
[18] C. T. Tsai and S. Mall, Elasto-plastic finite element analysis of
fretting stresses in pre-stressed strip in contact with cylindrical
pad, Finite Elements in Analysis and Design 36 (2000), 171-187.
[19] K. Walker, The Effect of Stress Ratio during Crack Propagation
and Fatigue for 2024-T3 and 7075-T6 Aluminum, Effects of Environment
and Complex Load History on Fatigue Life, ASTM STP 462, American
Society for Testing and Materials, Philadelphia, PA, (1970), 1-14.
[20] R. H. Wang, V. K. Jain and S. Mall, A non-uniform friction
distribution model for partial slip fretting contact, Wear 262 (2007),
607-616.