[1] C. Colin, L. Durant, N. Favrot, J. Besson, G. Barbier and F.
Delannay, Processing of functional-gradient WC-Co cermets by powder
metallurgy, International Journal of Refractory Metals and Hard
Materials 12 (1993-1994), 145-152.
[2] L. J. Prakash, Application of fine grained tungsten carbide based
cemented carbides, International Journal of Refractory Metals and Hard
Materials 13 (1995), 257-264.
[3] A. Rajabi, M. J. Ghazali, J. Syarif and A. R. Daud, Development
and application of tool wear: A review of the characterization of
TiC-based cermets with different binders, Chemical Engineering Journal
255 (2014), 445-452.
[4] W. B. Lee, B. D. Kwon and S. B. Jung, Effects of on the microstructure and mechanical
properties of the brazed joints between WC-Co and carbon steel,
International Journal of Refractory Metals and Hard Materials 24(3)
(2006), 215-221.
[5] A. Hassan, M. Y. Wahab, M. S. Noordin, C. Hussain and S. Izman,
Characteristics of electroplated nickel layer on tungsten carbide,
Applied Mechanics and Materials 315 (2013), 73-77.
[6] M. G. Nicholas, Joining Processes: Introduction to Brazing and
Diffusion Bonding, USA: Kluwer Academic Publishers, 1998.
[7] J. G. Flores, J. Cervantes and J. Lemus, Joining of silicon
nitride to metal (Mo and Ti) using a Cu-foil interlayer, Materials
Science Forum 509 (2006), 99-104.
[8] J. Lemus and R. A. L. Drew, Joining of silicon nitride with a
titanium foil interlayer, Materials Science Engineering A 352-306
(2003), 169-178.
[9] C. J. H. Chen, Q. Wang and Y. Li, Effect of brazing temperature
and holding time on joint properties of induction brazed WC-Co/carbon
steel using Ag-based alloy, Journal of Materials Processing Technology
229 (2016), 562-569.
[10] G. Maizza, R. Cagliero, A. Lacobone, R. Montanari, A. Varone, A.
Mezzic and S. Kaciulisc, Study of steel-WC interface
produced by solid state capacitor discharge sinter-welding, Surface
Interface Analysis (2016), 1-5.
[11] D. Janickovic, P. Sebo, P. Duhaj and P. Svec, The rapidly
quenched Ag-Cu-Ti ribbons for active joining of ceramics, Materials
Science Engineering A 304-306 (2001), 569-573.
[12] A. H. Carim and C. H. Mohr, Brazing of alumina with and interlayers, Materials Letter 33 (1997),
95-199.
[13] H. S. Chen, K. Q. Feng, J. Xiong, J. J. Luo, Z. X. Guo and H.
Wang, Characterization and forming process of a functionally graded
WC-Co/Ni composite, International Journal of Refractory Metals and
Hard Materials 35 (2012), 306-310.
[14] H. Chen, K. Feng, J. Xiong and Z. Guo, Characterization and
stress relaxation of the functionally graded WC-Co/Ni
component/stainless steel joint, Journal of Alloys and Compounds 557
(2013), 18-22.
[15] H. Chen, K. Feng, S. Wei, J. Xiong, Z. Guo and H. Wang,
Microstructure and properties of WC-Co/3Cr13 joints brazed using Ni
electroplated interlayer, International Journal of Refractory Metals
and Hard Materials 33 (2012), 70-74.
[16] A. Shirzadi, Solid state diffusion bonding, in Edit. Y. N. Zhou,
Microjoining and Nanojoining, Chapter 9 (2008), 234-249.
[17] L. Wang and F. Aldinger, Joining of advanced ceramics in green
state, Materials Letter 54 (2002), 93-97.
[18] E. Heikimheimo, I. Isomaki, A. A. Kodentsov and F. J. J. Van Loo,
Chemical interaction between Fe and silicon nitride ceramic, Journal
of the European Ceramics Society 17 (1997), 25-31.
[19] M. R. Locatelli, B. J. Dalgleish, K. Nakashima, A. P. Tomsia and
A. M. Glaeser, New approaches to joining ceramics for high-temperature
applications, Ceramics International 23 (1997), 313-322.
[20] R. A. Marks, D. R. Chapman, D. T. Danielson and A. M. Glaeser,
Joining of alumina via copper/niobium/copper interlayers, Acta
Materialia 48 (2000), 4425-4438.
[21] A. K. Jadoon, B. Ralph and P. R. Hornsby, Metal to ceramics
joining via a metallic interlayer bonding technique, Journal of
Materials Processing Technology 152 (2004), 257-265.
[22] J. Lemus-Ruiz, J. A. Verduzco, J. González-Sánchez and V. H.
López, Characterization, shear strength and corrosion resistance of
self joining AISI 304 using a Ni-Fe-Cr-Si metallic glass foil, Journal
of Materials Processing Technology 223 (2015), 16-21.
[23] J. Zhang, H. Y. Fang, Y. Zhou and M. Naka, Effect of bonding
condition on microstructure and properties of the joint brazed using Cu-Zn-Ti filler alloy,
Key Engineering Materials 249 (2003), 255-260.
[24] M. S. Kenevisi and S. M. Mousavi Khoie, A study on the effect of
bonding time on the properties of Al7075 to Ti-6Al-4V diffusion bonded
joint, Materials Letters 76 (2012), 144-146.
[25] M. Samavatian, A. Halvaee, A. A. Amadeh and A. Khodabandeh,
Transient liquid phase bonding of Al 2024 to Ti-6Al-4V alloy using
Cu-Zn interlayer, Transaction Nonferrous Metal Society China 25
(2015), 770-775.