References

THE EFFECT OF UV IRRADIATION ON SOME TECHNOLOGICAL PROPERTIES OF PLYWOOD PANELS FROM VENEERS DRIED AT DIFFERENT TEMPERATURES


[1] ASTM G 53-96, Standard Practice for Operating Light and Water Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Non-metallic Materials, Philadelphia, 1988.

[2] I. Aydin and G. Colakoglu, The Effects of Veneer Drying Temperature on Wettability, Surface Roughness and Some Properties of Plywood, Sixth European Panel Products Symposium, North Wales Conference Centre, Llandudno: October 9-11, North Wales, UK, 2002.

[3] I. Aydin and G. Colakoglu, Formaldehyde emission, surface roughness, and some properties of plywood as function of veneer drying temperature, Dry Technol. 23 (2005a), 1107-1117.

[4] I. Aydin and G. Colakoglu, Effects of surface inactivation, high temperature drying and preservative treatment on surface roughness and colour of alder and beech wood, Appl. Surf. Sci. 252 (2005b), 430-440.

[5] I. Aydin, G. Colakoglu and S. Hızıroglu, Surface characteristics of spruce veneers and shear strength of plywood as a function of log temperature in peeling process, Int. J. Solids Struct. 43 (2006), 6140-6147.

[6] E. J. Biblis, Effect of weathering on surface quality and structural properties of six species of untreated commercial plywood siding after 6 years of exposure in Alabama, Forest Prod. J. 50(5) (2000), 47-50.

[7] Z. Candan, S. Hiziroglu and A. G. McDonald, Surface quality of thermally compressed Duglas fir veneer, Mater. Design 31 (2010), 3574-3577.

[8] Z. Candan, U. Büyüksarı, S. Korkut, O. Unsal and N. Cakıcıer, Wettability and surface roughness of thermally modified plywood panels, Ind. Crop. Prod. 36(1) (2012), 434-436.

[9] A. W. Christiansen, How overdrying wood reduces its bonding to phenol formaldehyde adhesives: A critical review of the literature, Part I, Physical responses, Wood Fiber Sci. 22(4) (1990), 441-459.

[10] J. E. P. Custódio and M. I. Eusébio, Waterborne acrylic varnishes durability on wood surfaces for exterior exposure, Prog. Org. Coat. 56 (2006), 59-67.

[11] J. Custódio, J. Broughton and H. Cruz, A review of factors influencing the durability of structural bonded timber joints, Int. J. Adhes. Adhes. 29(2) (2009), 173-185.

[12] C. Demirkır, Using Possibilities of Pine Species in Turkey for Structural Plywood Manufacturing, PhD. Thesis, Karadeniz Technical University, Faculty of Forestry, Natural and Applied Sciences Institute, Trabzon, Turkey, 2012.

[13] DIN 4768, Determination of Values of Surface Roughness Parameters using Electrical Contact (Stylus) Instruments, Concepts and Measuring Conditions, Deutsches Institut für Norming, Berlin, 1990.

[14] T. Dundar, T. Akbulut and S. Korkut, The effects of manufacturing factors on surface roughness of sliced makoré (Tieghemella heckelii Pierre Ex A. Chev.) and rotary cut beech (Fagus orientalis L.) veneers, Build. Environ. 43 (2008), 469-474.

[15] EN 314-2, Plywood; Bonding Quality, Part 2, Requirements, CEN, Brüssel, 1996.

[16] P. D. Evans, N. L. Owen, S. Schmid and R. D. Webster, Weathering and photostability of benzoylated wood, Polym. Degrad. Stabil. 76 (2002), 291-293.

[17] W. C. Feist and D. Hon, Chemistry of Weathering and Protection, In: Roger M. Rowell, Editor, Chapter 11, The Chemistry of Solid Wood, Advances in Chemistry Series 207, Washington, DC: American Chemical Society, 1984.

[18] W. C. Feist, Exterior Wood Finishes, Coating Technology Handbook, Third Edition, 2006.

[19] R. C. Frihart, Adhesive bonding and performance testing of bonded wood product, Journal of ASTM International 2(7) (2005).

[20] R. C. Frihart and C. G. Hunt, Adhesive with Wood Materials, Bond Formation and Performance, Wood Handbook Wood as an Engineering Material, Contennial Edition, General Technical Report FPL-GTR-190, U.S. United States Department of Agriculture, Forest Prod. Lab., Chapter 10, Madison, WI, 2010.

[21] R. C. Gupta and B. S. Bist, Effect of peeling variables on strength of plywood, Part 1, Effect of heating log, Holzforsch Holzverw 33(1) (1981), 6-8.

[22] H. L. Hergert, FTIR Spectra, In “Lignins: Occurrence, Formation, Structure and Reaction”, Chapter 7, Edited by K. V. Sarkanen and C. H. Ludwing, New York: Wiley-Interscience, 1971.

[23] ISO 4628-4, Paints and Varnishes-Evaluation of Degradation of Paint Coatings-Designation of Intensity, Quantity and Size of Common Types of Defect, Part 4: Designation of Degree of Cracking, 1982.

[24] ISO 7724-2/3, Paints and Varnishes-Colorimetry, Part 2: Colour Measurement, Part 3: Calculation of Colour Measurement, ISO Standard, 1984.

[25] M. Jebrane, G. Sèbe, I. Cullis and P. D. Evans, Photostabilization of wood using aromatic vinyl esters, Polym. Degrad. Stabil. 94(2) (2009), 151-157.

[26] M. Lehtinen, Effects of Manufacturing Temperatures on the Properties of Plywood; Helsinki University of Technology, Laboratory of Structural Engineering and Building Physics, TRT Report No. 92, Finland, 1988.

[27] L. M. Matuana and D. P. Kamdem, Accelerated ultraviolet weathering of PVC/wood-flour composites, Polym. Eng. Sci. 42(8) (2002), 1657-1666.

[28] N. Morohoshi, Chemical Characterization of Wood and its Components, in “Wood and Cellulosic Chemistry”, Chapter 8, Marcel Dekker, Basel and New York, 1991.

[29] M. Piirlaid, M. Matsi, J. Kers, A. Rohumaa and P. Meier, Effect of Birch Veneer Processing Factors on Adhesive Bond Shear Strength, 8th International DAAAM Baltic Conference Industrial Engineering - 19-21 April, Tallinn, Estonia, 2012.

[30] B. H. River, C. B. Vick and R. H. Gillespie, Wood as an Adherend, in: J. D. Minford (Eds.), Treatise on Adhesion and Adhesives, Marcel Dekker, Inc., New York, 1991.

[31] R. M. Rowell, Handbook of Wood Chemistry and Wood Composites, Second Edition, CRC Press, 2013.

[32] A. Temiz, U. C. Yildiz, I. Aydın, M. Eikenes, G. Alfredsen and G. Çolakoğlu, Surface roughness and color characteristics of wood treated with preservatives after accelerated weathering test, Appl. Surf. Sci. 250 (2005), 35-42.

[33] A. A. Thant, S. S. Yee and T. T. Htike, Modelling Drying Time During Veneer Drying and Comparison with Experimental Study, Proceedings of the International Multi Conference of Engineers and Computer Scientists, Vol. II, IMECS 2009, March 18-20, Hong Kong, 2009.

[34] M. A. Tshabalala, R. Libert and C. M. Schaller, Photostability and moisture uptake properties of wood veneers coated with a combination of thin sol-gel films and light stabilizers, Holzforschung 65 (2011), 215-220.

[35] O. Unsal, N. Ayrilmis and S. Korkut, Effect of Drying Temperature on Surface Roughness in Beech (Fagus Orientalis L.) Veneer, In: Proceedings of the 9th International IUFRO Wood Drying Conference, Nanjing, 2005.

[36] R. S. Williams, Hand of Wood Chemistry and Wood Composites, USDA, Forest Service, Chapter 7: Weathering of Wood, Forest Products Laboratory, Madison, WI, 2005.